66-68 transmission neutral safety switch

[Richard Cranium]

Does anyone still carry them? All I can find is the 69 & up 3-prong switch.

If no one carries them, has anyone got a good used one?

Thanks!

 

[Herman]

Try Pat Blais (aka, Torquefitepatty) PM phone #

 

[mopar 3 B]

That would be a single wire switch with stud and nut.

 

[Fran Blacker]

Does anyone still carry them? All I can find is the 69 & up 3-prong switch.

If no one carries them, has anyone got a good used one?

Thanks!

They repo them. Can't tell who. $50 I think. I've an Nos one. Think I have a gasket, sold this one but have another I'm willing to sell.

 

[Fran Blacker]

http://www.ebay.com/itm/TF6-904-TF8...5-1966-1967-1968-Chrysler-Mopar-/300691379720

$68.65 for a single pin.

 

[not so famous bob]

http://www.ebay.com/itm/TF6-904-TF8...5-1966-1967-1968-Chrysler-Mopar-/300691379720

$68.65 for a single pin.

think, I GOT A NEW ONE IN THE BAG .

 

[Fran Blacker]

Pictures for RC.

 

[Richard Cranium]

Hey, that looks like a car I built!

 

[Fran Blacker]

It is. I think I took those pictures at a meet in Westwood mass in early 80's.

 

[Richard Cranium]

It is. I think I took those pictures at a meet in Westwood mass in early 80's.

Yup, that's in front of my parent's house in 1986. Apparently, you followed me home. I still have that license plate.

 

[MarPar]

Hey Dickie, I think I have a few of them. ill check and get back to you

 

[MarPar]

nevermind. the box says neutral safety, but its actually an oil pressure switch.

 

[Fran Blacker]

Yup, that's in front of my parent's house in 1986. Apparently, you followed me home. I still have that license plate.

Now I'm not sure I took them, maybe you gave them to me? I don't think I followed you home? They've been on my garage wall for years. Had trouble pulling the tack out of wall. Tip of tacks rusted and drywall suck to the metal. In PM I should have re-read it what poor grammar, oh man.

 

[69b3rt]

Are you guys referring to the neutral safety switch or reverse light switch?

 

[Fran Blacker]

Just the neutral safety switch, single threaded pin. They changed later to 3 pin with I assume backup lights. I never owned a car with 3 pin so what I know is limited.

 

[69b3rt]

I thought the neutral switch was on the steering column and the reverse switch was on the transmission. You can correct me if I am wrong.

 

[Fran Blacker]

I don't know about column shifter cars at all. I have a console shift auto and it has switch on shifter for reverse lights. Think they changed to the three pin in 68? The wire on the single pin I think goes to starter relay.

 

[69b3rt]

OK. I was getting the switches mixed up, which ones that were reverse and neutral safety.

 

[Richard Cranium]

On 68 column shift car had the b/u switch on the bottom of the column near the firewall & on a console shift car, the switch was located on the shifter mechanism. I'm no expert, on earlier cars, but I believe that 66-67 cars were set up the same way. The 3-pin switch started in 1969.

 

[69SportSatellite]

Speaking of neutral safety/backup light switches, will one from a 904 work in a 727? I am having a 1967 727 installed in my factory 904 equipped 1969 Sport Satellite and the question has come up about interchangeability. Any help would be appreciated - thanks!