66 Satellite Fender Mount Turn Signal Sockets

[Dash Riprock]

So I have the chrome indicators (just rechromed) but have no wiring or sockets for the bulbs. Have figured out that they use a 330 bulb but it would be nice to have a socket and pigtail to put the bulbs in. Any ideas? Thanks.

 

[Don Frelier]

I converted mine to little LED lights.
https://www.ebay.com/itm/172445660529

They fit perfectly inside the existing housing.

 

[Fran Blacker]

Did you drill the lens to install them?

 

[Don Frelier]

No there is already a hole in there.

 

[mtbase]

Brewers will have all the correct stuff

 

[Dash Riprock]

This is exactly what I needed. Will talk to Brewers tomorrow. Many Thanks!

 

[Dash Riprock]

I converted mine to little LED lights.
https://www.ebay.com/itm/172445660529
View attachment 1194031
They fit perfectly inside the existing housing.
View attachment 1194032

Thanks Don. This is perfect!

 

[Dash Riprock]

Just ordered them off ebay Don. I may need your expertise in installing. Will be in touch. Thanks again!

 

[Dash Riprock]

Just ordered them off ebay Don. I may need your expertise in installing. Will be in touch. Thanks again!

One more question Don. Did you use the original lenses? Are they pretty bright? One of the original brackets that holds the bulb in broke on mine. Will try to fabricate another one. If no go...I'll glue the damn thing in!

 

[Don Frelier]

Yes I used the original lenses.
I think the brightness is fine.
Never had working originals so I don't have anything to compare with.

 

[Dash Riprock]

Yes I used the original lenses.
I think the brightness is fine.
Never had working originals so I don't have anything to compare with.

Thank you Sir.

 

[BobH]

I was just thinking about how to do this, now it'll be easy.

 

[MemphisBigRich]

Yes I used the original lenses.
I think the brightness is fine.
Never had working originals so I don't have anything to compare with

No there is already a hole in there.

Don,

Don,
You seem to have a lot of experience with these fender blinker, I was wondering if you could tell me the route of the wires from front signal light to under front fender

 

[Auggie56]

What does an original look like? I have seen two different designs.

Thanks