bobbio
Member
I ruined my P.S. pulley for my 67 TRW pump using a jaw puller. The pump is on a 67 Satellite 383 4 speed car. To make matters worse, I knew better. Long story short I need a replacment pulley and have not had any luck yet out on the net and was hoping someone here may actually have one.
Press fit
Pulley O.D. 4.75"
Bore size about .625"
Offset away from pump towards radiator of about .75" from the back of the hub to the pulley centerline.
If anyone can help save a dumb*** I sure would be grateful.
Press fit
Pulley O.D. 4.75"
Bore size about .625"
Offset away from pump towards radiator of about .75" from the back of the hub to the pulley centerline.
If anyone can help save a dumb*** I sure would be grateful.
