• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

68 Charger Exhaust Bracket Hardware

Macdon221

Well-Known Member
Local time
8:35 AM
Joined
Jun 3, 2019
Messages
367
Reaction score
170
Location
Winnipeg, MB
Hello All,

Managed to find an original set of these brackets. Cleaned them up. Now I need help with the Original Hardware...Nuts, Washers etc.

Can anyone point me in the right direction for the correct style, markings, etc 6 bolts that are used as well as the washer’s etc if required.

Thanks

4E0D8A8D-AA5E-4575-A5D4-3A4AA6C1333E.jpeg
 
Awesome! Thanks so much.

Assuming then that all 6 are the same?
 
They are not all the same. I think the two that go into the frame are the same...but the one that threads into the clip for the rear bumper bumperette is different. Can anyone identify the proper bolts?
 
Here is the hardware from my 1970. I believe they were all the same. Year wise that is.

0000000000000000000000000000000000000000000000000000000000bumper brackets.JPG

Just took some measurements. The best I can tell the big bolts are...
7/16 NC X 1 3/4" long
The small ones are...
5/16 NC X 1"
The small ones are sort of chrome plated. The big one are that black chromate or phosphate coating. You know what I mean. The nice flat black ones.
 
Last edited:
I know this is an old thread started by me...but just getting to this now.

The link above....gives the proper bolt for the 2 bolts into the frame. (2 for each side)

Does anyone have a link to the correct bolt that goes through the bracket, into the Jclip and then into the bumper guard. Having trouble identifying the correct one.

Thx
 
Auto Transport Service
Back
Top