'69 B Body 383 - I would like to add a fan shroud. Will this work?

[MikeyM]

Hi all,

'69 Super Bee with a 22" radiator, no AC. I'd like to add a fan shroud then, later, a fan clutch setup. I was looking at the below shroud but they're saying it will work for 440 only. However, the hole to hole measurements they provide are the same as I have, my fan is just under 18", and the opening for the fan in the shroud is 20". It sure looks like it would work to me.

https://www.classicindustries.com/p...-7cIqayI499n2HMVflxoCmcwQAvD_BwE&gclsrc=aw.ds
I also found this one that looks like it WILL work and it looks exactly like the one above but is about 25 bucks more. Anyone know if these are the same shroud?
Radiator Fan Shroud 22" 1969 B-Body & C-Body 440

Thanks,
Mikey

 

[Don67Satellite]

They look the same to me with the exception that Vans added a bit more detail of applications that it will work with, namely the 69 small blocks.

 

[Mopar Hunter]

Those new reproduction plastic shrouds warp after a while, get a 1968 383 two piece metal one.