Bighouse
Well-Known Member
I’ve just put power to my charger which I have done a lot of cutting and welding work to right after I got it. I have a project thread called 1969 Charger 340.
I have no turn signals, hazards or instrument lights. All else is functioning, park/stop, dome, hi & lo beams. All the bulbs are new. Rear light harness is also new.
What I’ve found so far;
1- No power at either side of the instrument light fuse (the first fuse on the right) the others have power on both ends
2- No power to any of the pins on the turn signal switch connector with the key on.
It has got late on me and no I do not have a wiring diagram. If someone could share one that would be awesome. I plan on cleaning the bulkhead connectors and looking into that tomorrow.
Car has power windows (working) and AC. If that makes a difference
I was hoping someone could point me in the right direction.
Thanks everyone
I have no turn signals, hazards or instrument lights. All else is functioning, park/stop, dome, hi & lo beams. All the bulbs are new. Rear light harness is also new.
What I’ve found so far;
1- No power at either side of the instrument light fuse (the first fuse on the right) the others have power on both ends
2- No power to any of the pins on the turn signal switch connector with the key on.
It has got late on me and no I do not have a wiring diagram. If someone could share one that would be awesome. I plan on cleaning the bulkhead connectors and looking into that tomorrow.
Car has power windows (working) and AC. If that makes a difference
I was hoping someone could point me in the right direction.
Thanks everyone