• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

69 Roadrunner belt line trim install

Torkmnstr

Well-Known Member
Local time
9:16 PM
Joined
Jul 22, 2011
Messages
970
Reaction score
783
Location
San Jose
Anyone have measurements and sizes of the holes needed to install the clips? My doors have been replaced at some point with non trim door. Not sure why, I have the rear quarter surrounds on there. TIA.
IMG_3797.jpeg
 
Yes L31 is an option on road runner cars too, not strange at all. It will be on 69 and 70 fender tags that are not from Lynch Road. There was an unrestored original Superbird at Wellborns 2019 meet with L31 belt line trim, on the broadcast sheet.

The door trim and hole location would be the same as a convertible as they all had that trim to match up with the trim around the top opening.
 
Yes L31 is an option on road runner cars too, not strange at all. It will be on 69 and 70 fender tags that are not from Lynch Road. There was an unrestored original Superbird at Wellborns 2019 meet with L31 belt line trim, on the broadcast sheet.

The door trim and hole location would be the same as a convertible as they all had that trim to match up with the trim around the top opening.

Where can I find those measurements?
 
@Charles Cook one last random question. Does it matter which way the clips go in? Also I have the correct trim prices for my post car, kinda hard to tell but it looks like the shorter end goes under the post in the last pic.

IMG_3801.jpeg
IMG_3802.jpeg
IMG_3799.jpeg
IMG_3800.jpeg
 
Back
Top