69 RR Glove box

[jimbosride]

Put a new glove box in and it was pretty much straight forward.

But it came with these 2 bumpers. Where do they go?


Also the new glove box had a piece of the box that came over the fuse panel under the flap so you could not see the fuse box after unscrewing the flap? I trimmed it ?

Box came from Vans ... USA made.

 

[RR Fan Dan]

Those go in the door frame at the top. The door closes up against them. Should be holes at each corner.

 

[jimbosride]

Those go in the door frame at the top. The door closes up against them. Should be holes at each corner.

Under the hinges?

 

[RR Fan Dan]

Under the hinges?

Does your glove box swing down to open? Then look at the 11 o’clock left top corner and one o’clock right top corner positions of the frame. Are there holes there? They push into the holes. The door closes against them to keep from rattling.

 

[Bird 426]

'69 Road Runner glove box swings up. I have mine apart, will get back with you on the rubber bumpers. Yeah, I think something is wrong over by my fuse box flap too.

 

[RJ Squirrel]

I had to trim mine too at the fuse box.

 

[Bird 426]

Just went out and checked my glovebox, I see no rubber bumpers. Having said that, my glovebox was not functional for years because of a roll cage support, which I am correcting. I believe though, that I have everything, everything is not together yet. I see no holes for rubber bumpers.