• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 70-71 hemi 440+6 oil pan

Status
Not open for further replies.

k-ams

Well-Known Member
Local time
3:42 AM
Joined
Oct 1, 2012
Messages
84
Reaction score
2
Location
wisconsin
Feedback: 0 / 0 / 0
looking for a hemi or 440+6 oil pan. Some dents are fine or if it needs work or surface rust okay also.

thanks
 
Here is the part number for the pan you are looking for. Hope this helps your search. 2951564
 
One little tip I might throw out if you end up using aftermarket parts..... when I was putting a hemi/6-pack pan & pickup on my motor for street use I found that the aftermarket pans/pickups are not exactly stock size. What I mean is that I found that I could NOT mix & match the pickup and the oil pan since there were slight differences brand-to-brand (basically, none of them are exact copies of an original hemi/6-pack part from what I can tell). The moral of the story is that if you go aftermarket, get the pan & pickup tube from the same manufacturer.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top