So I am reassembling the front suspension now I just want to make sure that I’m not screwing something up. Here with it here’s what I have so far:
1. The UCA, LCA, sway bar, shock, spindle, are all reinstalled but not tightened, torsion bar too.
2. I still have the bump stop for the upper control arms, Pitman arm, inner and outer tie rod ends & center Link. I also still have clips for the torsion bars to install.
3. So my question is what sequence should I tighten and torque everything together?
sounds simple, but what am I missing? Any advice? Thanks In advance.
1. The UCA, LCA, sway bar, shock, spindle, are all reinstalled but not tightened, torsion bar too.
2. I still have the bump stop for the upper control arms, Pitman arm, inner and outer tie rod ends & center Link. I also still have clips for the torsion bars to install.
3. So my question is what sequence should I tighten and torque everything together?
sounds simple, but what am I missing? Any advice? Thanks In advance.