WTB 71 b body windshield channel and small roof section

[Holtzer1]

Yes, I realize the donor car will need to be sliced up for this part. But...
I need the front drivers side windshield channel from the center of the windshield to the drivers a pillar including approx 6" of the roof sheet metal.

 

[Holtzer1]

Located 65041 missouri for shipping info

 

[RT K_line]

Is that windshield glued in? And would that section from another car work, you think ?

 

[Holtzer1]

The windshield is in there with a combination of bathtub silicone it looks like and 45 year old urethane.
Yes, that section from another car would work, that's what I'm looking for

 

[RT K_line]

Sorry I should have been more clear. Will that section from a 67 Belvedere work? I will try to get pics today if you think you might be able to use it. It would be easier to compare the flange if your windshield was out though. Mine is out.

 

[Holtzer1]

That I'm not sure, I don't know a whole lot about the compatability between old mopars.

 

[ralley72]

Hello, I have a 73 B body with good roof and A pillars, just what you need. I'm in 64040. still on the car

Mike