71GTXdragpack
Active Member
Hi all,
just removed the 83/4 and installed the correct Dana60 on my GTX. Once I torqued the wheels on, the wheels are extremely difficult to turn while off the ground. If I take loosen the torque on the wheel nuts, it seems to improve.
There was no binding or issues with the 83/4 however I did install a new set of shoes while everything was apart. Could the shoes be out of spec and interfering with the drum?
The brakes are adjusted and there's no tension on the emergency brake cable.
Any suggestions are appreciated.
Karl
just removed the 83/4 and installed the correct Dana60 on my GTX. Once I torqued the wheels on, the wheels are extremely difficult to turn while off the ground. If I take loosen the torque on the wheel nuts, it seems to improve.
There was no binding or issues with the 83/4 however I did install a new set of shoes while everything was apart. Could the shoes be out of spec and interfering with the drum?
The brakes are adjusted and there's no tension on the emergency brake cable.
Any suggestions are appreciated.
Karl