'71 z-bar pivot mount

[chrisjn]

I have a '71 satellite that I am converting from 318 auto to 440 4-speed . I have a rough location where the z-bar bracket is welded to the frame but was hoping someone has some location dimension so I get it right . Worst case I can fit the motor and bellhousing in the car to get the proper location but was hoping someone has done this before.

 

[Daves69]

Hi and welcome. We like pictures!

http://brewersperformance.com/proddetail.asp?prod=FB470

Check for a notch on the frame for the small tab to fit in.
If none I believe the goal is the bar should be straight across in any view.

 

[chrisjn]

The car is gutted atm while I am changing it over. Spent a few $$$ at brewers. I'll look for a notch, thanks.