• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

727 trans oil level question.

440 Charger

Well-Known Member
Local time
9:31 PM
Joined
Aug 1, 2020
Messages
1,603
Reaction score
688
Location
naples Fl
Does anyone know oil level full mark in relation to the transmission case. I have to cut down and remark a dipstick the old was rotten and gone. Looks like the pan mounting is about correct trying to double check if anyone knows thank you.
 
Does anyone know oil level full mark in relation to the transmission case. I have to cut down and remark a dipstick the old was rotten and gone. Looks like the pan mounting is about correct trying to double check if anyone knows thank you.
My 727 stick is 18&3/4" from tip to cap top
18" from tip to 1st or lower stake for washer.
Full mark is 1 & 3/4" from tip
Add 1 pt. Mark is 1 & 1/8" from tip .



Stick tube is 18 & 1/2 " to top.
That was measured with a tape and hooking the bottom inside edge. So that tube number could be give or take a 1/4.
 
My 727 stick is 18&3/4" from tip to cap top
18" from tip to 1st or lower stake for washer.
Full mark is 1 & 3/4" from tip
Add 1 pt. Mark is 1 & 1/8" from tip .



Stick tube is 18 & 1/2 " to top.
That was measured with a tape and hooking the bottom inside edge. So that tube number could be give or take a 1/4.
Perfect thank you very much.
 
Back
Top