8 3/4 Storage box
- Thread starter WS23U1
- Start date
- Local time
- 11:17 PM
- Joined
- Dec 25, 2011
- Messages
- 6,543
- Reaction score
- 8,607
- Location
- White Cloud, MI
I have 6-7 8 3/4 housings I cut the tubes off and welded plates over the ends and a handle on top, for storage.
Mike
Mike
- Local time
- 8:17 PM
- Joined
- Sep 16, 2020
- Messages
- 1,101
- Reaction score
- 2,558
- Location
- Washington state
I wrap mine is a plastic bag and in they go. But that's just me 
BeepBeepRR
Well-Known Member
Home depot 5 gallon bucket with a lid.
- Local time
- 8:17 PM
- Joined
- Jul 9, 2019
- Messages
- 12,008
- Reaction score
- 31,801
- Location
- Modesto California
I have a wooden box, probably 12"x12"x 5"
it has a hole to receive the exposed gears so the pinion stores nose up... It has a couple stout handles to make carrying it easier.. I'll try to take a photo when Im at the shop tomorrow
it has a hole to receive the exposed gears so the pinion stores nose up... It has a couple stout handles to make carrying it easier.. I'll try to take a photo when Im at the shop tomorrow
33 IMP
Well-Known Member
- Local time
- 8:17 PM
- Joined
- Dec 21, 2017
- Messages
- 15,301
- Reaction score
- 26,381
- Location
- taxifornia,soon 2b Arizona.
I have three or four round Costco laundry soap buckets that I use.
Now the soap comes in rectangular buckets. Useful for car washing only., darnit!
I also have a really elaborate well built box that my new 9"center came in .
I don't know if an 8 3/4 center will fit. With my luck...... nope.
Now the soap comes in rectangular buckets. Useful for car washing only., darnit!
I also have a really elaborate well built box that my new 9"center came in .
I don't know if an 8 3/4 center will fit. With my luck...... nope.
- Local time
- 8:17 PM
- Joined
- Jul 9, 2019
- Messages
- 12,008
- Reaction score
- 31,801
- Location
- Modesto California
Hilljack68
Well-Known Member
Same as 1 Wild R/T, but I used a Lowe's bucket. Cut a hole in a piece of 1/2" plywood, put it on the bucket, and dropped the gear side in. Put that on a Harbor Freight dolly for mobility... done!
Works well for painting the pig too.
Works well for painting the pig too.
Daves69
Well-Known Member
A two 5 gallon bucket design (not mine). The one you cut a hole out of the bottom can also be used to paint.
..........
www.forabodiesonly.com
www.forabodiesonly.com
..........
Home Made Easy 8-3/4 Center Chuck Storage
Take 2 empty 5 gals buckets and one cover. cut the bottom of one of the bottoms minus 1/2"-3/4" to leave as a small lip place one bucket with the cut bottom inside the whole bucket This is my tool of choice for cutting out the bottom of the...
www.forabodiesonly.com
So Simple--8 3/4 Chunk Repaint Properly
Been doing this for years the same way. I'm a body/paint guy but anyone can do this. Small 5 gallon bucket with lid. Cut 9" hole in bottom side of bucket. Tip upside down. Your chunk should fit nicely and with lid on will hold any residue of gear...
www.forabodiesonly.com
Similar threads
