906 factory flow rate?

[68Satellite440]

Afternoon guys,
I’m needing some feedback or results if anyone has flowed some factory non-ported 906 heads. Im needing the CFM flow results for doing some math equations for camshaft compatibility. Ive seen a couple guesstimates at 210-230cfm. But im hoping someone has the actual results.

The engine is ‘68 440hp block with factory 906 heads and factory intake with 600cfm carb and new long tube headers.

 

[Lefty71]

This guy has;

http://[URL]http://users.erols.com/srweiss/tablehdc.htm

[/URL]


Scroll down and look for BB Chrysler

 

[33 IMP]

Lefty tree'd me. Stan Weiss's site was what I was gonna recommend.......
A big part of flow on stock heads is the quality of the valve job. I've heard of bad valve job heads at under 200. I think 230 is high side of stock, with a good valve job.

 

[Lefty71]

Lefty tree'd me. Stan Weiss's site was what I was gonna recommend...

I learned of it from you, kudos to you. Since then, I've found myself lost for hours there!

 

[Canadian1968]

The link doesn't seem to be working? Interested in the numbers

 

[33 IMP]

The link doesn't seem to be working? Interested in the numbers

I ve got it bookmarked on my phone.
Google it, it will come up
"Stan Weiss cylinder head flow data".