SDCoronet
Well-Known Member
Found this on the A body forum. It looks like the floor pan usually does not have to be cut. The tunnel brace will need to be modified.
I have read that some people have had to shape one or two spots of the tunnel (via sledgehammer) to get a little bit of clearance. If I find those threads i'll post them here.
https://www.forabodiesonly.com/mopar/threads/project-67-dart-gt-340-a500.359724/
I have read that some people have had to shape one or two spots of the tunnel (via sledgehammer) to get a little bit of clearance. If I find those threads i'll post them here.
https://www.forabodiesonly.com/mopar/threads/project-67-dart-gt-340-a500.359724/