Air/Fuel Ratio Meter?

[Road Grabber]

A few years back I brought an engine to an engine shop that was going to assemble and put it on a dyno. The builder said he couldn't finish the job and left me with finishing the assembly but now I didn't get to put the engine on the dyno.

My engine is installed and I am working out some issues. I want to know if there is a "kit" or means out there that enables me to monitor air/fuel ratio so I can accurately tune my six pack setup. I'd like to start with checking A/F at idle and check full throttle.

I would think I have to install an O2 meter? Does anyone sell a device that allows me to monitor air/fuel at different speeds?

Any suggestions? Can anyone do this with the engine installed? The car is a 70 Charger.

Thanks in advance.

 

[71RRHI]

I think this is what your looking for. Check out Summit they have many kits.

Innovate Motorsports 3891 Innovate DLG-1 Dual Lambda Air/Fuel Ratio Gauges | Summit Racing

Free Shipping - Innovate DLG-1 Dual Lambda Air/Fuel Ratio Gauges with qualifying orders of $109. Shop Gauges at Summit Racing.

www.googleadservices.com

 

[Road Grabber]

I think this is what your looking for. Check out Summit they have many kits.

http://[URL]https://www.googleadser...iNAxX2FzQIHWjxEhIQwg8oAHoECAcQGw&nis=7&adurl=

[/URL]

Thank you

 

[Don67Satellite]

F.A.S.T makes a interesting wireless AFR deal in single or dual sensor configurations that seems discrete & works with your smart phone. Kinda neat for on demand AFR readings without the need for extra mounted gauges. Pricey though.

 

[493 Mike]

I have one of these to sell. Only used a couple of times. I used the exhaust bungs so, you will need a couple of them. I will include the power board I constructed too. PM me for price.
https://www.jegs.com/i/FAST/244/170602/10002/-1
Mike

 

[Road Grabber]

Thanks for the responses