BeepBeepRR
Well-Known Member
Contact seller
I have a 440 with 60 over pistons the engine ate a cam and needs to be taken apart and cleaned. Pretty much a complete engine minus a cam and lifters. Has a MSD RTR distributor but needs a cap. And a set of valve covers. Other than those items and a good clean up should be a solid 440. I had plans to keep this engine but I need to sell it to pay some bills. I will throw a price up of 2000.00 Make a decent offer and it can be yours. I have the heads off the engine out in my shed because I wanted to make sure it had no burnt valves. Heads are in good shape. I can get you more information on the block if needed. I think its a 70's era block. Did not see a number on the pan rail.
Pad Information 4T440 E
Block Casting Number 3698830-440 I think it says 78
CH4B intake Great intake if you have a N96 car. Probably not the best performing intake but it fits under the hood.
906 Heads
Rocker shafts
Rockers
Push rods
Water pump housing
Oil pump
Timing set
Forged Crank
Forged Pistons.
ARP Rod bolts
Valve covers are used on new 440
Aluminum Water pump as well as pulleys
Pad Information 4T440 E
Block Casting Number 3698830-440 I think it says 78
CH4B intake Great intake if you have a N96 car. Probably not the best performing intake but it fits under the hood.
906 Heads
Rocker shafts
Rockers
Push rods
Water pump housing
Oil pump
Timing set
Forged Crank
Forged Pistons.
ARP Rod bolts
Valve covers are used on new 440
Aluminum Water pump as well as pulleys
Last edited: