bearing splitter for 833 trans

[tgc]

Hey guys and gals,

I am rebuilding my 833 4 speed trans and need to remove the main bearings from the shafts. I am having issues finding a splitter that fits behind the bearing. Also talked to a couple local trans shops to remove the bearings for me but they didn't want to mess with it. 2 shops gave me 2 excuses. We're too busy and our press is down.

Any ideas or help on where I can find a splitter that is thin enough to fit behind these bearings?

Thanks in advance.

 

[5.7 hemi]

I got one on ebay and it worked just fine on 3 a833's.

 

[tgc]

I got one on ebay and it worked just fine on 3 a833's.

Can you tell me which one you got? there are a lot to choose from on ebay.

 

[5.7 hemi]

I don't remember the part number, so let me look on ebay.

- - - Updated - - -

Here it is.......
http://www.ebay.com/itm/Calhawk-Large-4-3-4-Capacity-Bearing-Separator-Puller-Remover-Gear-Splitter-/271645678777?hash=item3f3f581cb9&item=271645678777&vxp=mtr

 

[tgc]

I don't remember the part number, so let me look on ebay.

- - - Updated - - -

Here it is.......
http://www.ebay.com/itm/Calhawk-Lar...hash=item3f3f581cb9&item=271645678777&vxp=mtr

Thank you very much

 

[5.7 hemi]

No problem.