Just Send It
Well-Known Member
Contact seller
Edelbrock STR-14-6 with 2 STR-14-45 tops.
I bought this at the 2002 Turkey Rod Run in the infield of Daytona International Speedway. It has traveled with my family from Florida, to Colorado, to Texas, and finally to Oregon. It is one of my favorite collectibles that I own, but I'm coming to terms with the fact that I'm likely never going to get the chance to use this extremely rare piece in this life. I would like for someone else to have it and hopefully use it.
To my knowledge, it has never been bolted down to an engine (at least not since I've had it). The inside has never been ground or modified. At some point, someone did bastardized one of the 4500 tops that I bought by polishing it and cutout the barrel holes.. The other 4500 top is totally untouched and has never been modified.
The 6-Pack top does have a small 3/8" chip which must have happened during one of our moves. Aside from that, it's in extremely good condition and is also unmodified.
All of the threads have been chased and they're all in great shape.
These have been sitting inside of a Conex box for almost 25 years and they would benefit from a proper cleaning. I used a magic eraser to see what the aluminum looked like underneath and it's still bright like the day I bought it. You can use this as-is or really shine them up.
$1,500 + shipping for everything including the hardware. I do not have the gasket.
I'm located in Central Oregon if you'd like to come take a look in person. My zip is 97702.
Here is the photo where I cleaned it.
Edelbrock STR-14-6 with 2 STR-14-45 tops.
I bought this at the 2002 Turkey Rod Run in the infield of Daytona International Speedway. It has traveled with my family from Florida, to Colorado, to Texas, and finally to Oregon. It is one of my favorite collectibles that I own, but I'm coming to terms with the fact that I'm likely never going to get the chance to use this extremely rare piece in this life. I would like for someone else to have it and hopefully use it.
To my knowledge, it has never been bolted down to an engine (at least not since I've had it). The inside has never been ground or modified. At some point, someone did bastardized one of the 4500 tops that I bought by polishing it and cutout the barrel holes.. The other 4500 top is totally untouched and has never been modified.
The 6-Pack top does have a small 3/8" chip which must have happened during one of our moves. Aside from that, it's in extremely good condition and is also unmodified.
All of the threads have been chased and they're all in great shape.
These have been sitting inside of a Conex box for almost 25 years and they would benefit from a proper cleaning. I used a magic eraser to see what the aluminum looked like underneath and it's still bright like the day I bought it. You can use this as-is or really shine them up.
$1,500 + shipping for everything including the hardware. I do not have the gasket.
I'm located in Central Oregon if you'd like to come take a look in person. My zip is 97702.
Here is the photo where I cleaned it.
Last edited:














