Brake Pedal Spring

[1967 satellite]

Can anyone tell me where this sprung attaches under the dash. I believe one end hooks up to the pin on the brake pedal arm but not sure where the other end goes?

 

[PurpleBeeper]

It “looks” like a clutch release fork return spring (if heavy), or a carburetor throttle return spring (if light). It’s hard to judge size in the picture

 

[silversedan]

throttle spring

 

[1967 satellite]

It “looks” like a clutch release fork return spring (if heavy), or a carburetor throttle return spring (if light). It’s hard to judge size in the picture

It was under my dash. One end was attached the other was stuck right above the column

 

[1967 satellite]

throttle spring

and I found it under my dash right above the steering column

 

[RemCharger]

The spring that goes under there vertically from the column support to the bellcrank pivot has a funky end on it. At least in 66-67

 

[R413]

What brake system do you have. Power or manual?

Factory only used a spring on power brakes. Your spring is not a factory PB spring. Many people use a spring when the brake pedal won't return and the brake lamps stay on.

 

[1967 satellite]

Power brakes