• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Cam removal 440 BB

STREETREBEL

Well-Known Member
Local time
3:27 AM
Joined
Feb 11, 2012
Messages
384
Reaction score
661
Location
Willard,Mo.
So i can't pull my cam out!
I removed the oil pump gear and of course the lifters.
The cam will only move about a half an inch and stop.
What did I forget?
 
If distributor drive, fuel pump pushrod and lifters are all out it's just the lobes catching on the block journals. Thread a long bolt into the nose for leverage and move the ***-end of the cam around; it'll come out.
 
Auto Transport Service
Back
Top