Can someone help me with some measurements? (68 Charger)

[moparnation74]

LOL, I wasn't looking for it! I was looking for my speedo location picture with dimensions! Guess if I went out to the shop I could just take a picture of my printed out picture I gave my metal man.. if it's still there. Same deal with your gas pedal location pics... lol

Lol Wayne just poking you a bit my friend!

 

[69bfan]

If the floor pan has been replaced, you will also need this piece to hold the cable to the floor pan as well as the cable bracket that Wayne pictured. As a suggestion, once you determine the approximate location of the pedal, install the gas pedal arm that attaches to the firewall. That will confirm that the gas pedal is close to the approximate location as well.

 

[dadsbee]

Gave up looking digitally, dug though my paperwork box in the shop and took pictures of printed out pictures.

Speedo clip location (measurements are from edge of flange, not Xmember or frame rail) and a shot of the orientation in comparison to the "rib". No idea what the tape is showing. My clip came in a zip lock bag taped to the floor pan. Life would be easy if AMD just welded it on!

Also a picture of the pedal hole locations from the firewall to floor seam @ ~ 9 1/4". Justin had better measurements...

 

[RT68440]

Thank you very much!!

 

[dadsbee]

Cleaned up my work bench today and found the print out I took... so I knew where to look! LOL

Post #319 https://www.forbbodiesonly.com/moparforum/threads/depoulis-1969-charger-318.131558/page-16

 

[moparnation74]

Cleaned up my work bench today and found the print out I took... so I knew where to look! LOL

Post #319 https://www.forbbodiesonly.com/moparforum/threads/depoulis-1969-charger-318.131558/page-16

You da man!