Carter AVS 4 Barrel Carburetor 4 Hole Base Gasket

[robl72]

Hi,

I am looking for a Brand and Part number to replace my carburetor base gasket for my Carter AVS 4 Barrel Carb. I am running a stock intake on a 69 Charger 440 R/T with Auto trans.

Looking for a 4 Hole gasket and stock thickness .

Thanks!

 

[440 4 speed]

Hi,

I am looking for a Brand and Part number to replace my carburetor base gasket for my Carter AVS 4 Barrel Carb. I am running a stock intake on a 69 Charger 440 R/T with Auto trans.

Looking for a 4 Hole gasket and stock thickness .

Thanks!

You should be able to go to any place that sells parts, Rock auto, private guys . Speed shops etc, Chrysler dealer maybe.

 

[oldkimmer]

Here is a few of my collection. Kim

 

[pedal2themetal]

HI if this is a stock application try and use one of those thick gaskets like above the Echlin 2-7599 has the plastic inserts so you don't over tighten the gasket, or the 2-7445 would work.. You want the thick gasket to help separate the carb from heat transfer from the motor..
good luck
tim

 

[Bee1971]

I thought 68-69 used a thin 1/16" gasket based on the factory choke thermostat

Then 70-71 used the thicker 3/16"- 1/4" divided gasket based on the factory choke thermostat


If not running the factory choke , then disregard

 

[oldkimmer]

The top pic is the thin gasket. Kim

 

[oldkimmer]

Maybe he can tell by the length of the bolts or he has the old gasket. Kim