Cast iron paint

[Red63440]

Is there a rattle can cast iron pant that doesn’t need to be baked?

 

[69L48Z27]

I use the cast blast hi temp and then let the engine do the baking. Seems to be just fine.

 

[1 Wild R/T]

https://www.amazon.com/Seymour-16-2...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Somewhere in the print they mention aluminum... Ignore them.. Look at the label on the can, it look's like cast iron.. When you spray it light coats & let it flash off, If you get it wet it'll look shiny... You want light coats so it lays down flat/satin like real cast iron..

 

[T2R9]

Seymour Cast Blast 16-2668 is pretty much the best rattle can high temp I have found.

 

[Potts]

Def Cast Blast. Around $6 on this site but $7 shipping. If you get free shipping from Amazon, prob the best deal.
https://www.jbtools.com/seymour-pai..._LNWk4DfuBQkqWEDYIU_Tq5VtAZmJkEhoCu8wQAvD_BwE

 

[Red63440]

Thus isn’t for manifolds which is why I need no bake.

 

[1 Wild R/T]

Thus isn’t for manifolds which is why I need no bake.

Cast Blast isn't for manifolds

 

[VANDAN]

Been using this Rattle-Can for detailing ?

I buy it at Advance Auto, less than $10/can...

 

[Red63440]

Amazon wants over $14.00 a can with free shipping, they bend you over one way or another.

 

[1 Wild R/T]

Amazon wants over $14.00 a can with free shipping, they bend you over one way or another.

Go ahead & drive around looking for it... Burn a few gallons of gas & if your lucky you'll find someone who sells it.... For $7-8 a can.... Or click a button & it'll be on your door step in a couple days....

The only company that use to carry it locally hasn't had it for over 15 years...

 

[Potts]

Now matter what, to ship a can of paint is a Haz Mat.
I'll take free.

 

[Red63440]

Let me ask this, can manifold paint be used on other cast iron surfaces? I have VHT spray and Eastwood brush.

 

[BeepBeepRR]

Check out VHT cast paint.

https://www.amazon.com/VHT-SP998-Fl...t=&hvlocphy=9010837&hvtargid=pla-567046724587

https://www.amazon.com/VHT-SP997-En...t=&hvlocphy=9010837&hvtargid=pla-567778280091

 

[BeepBeepRR]

You can see a set of cast painted HP manifolds here.

 

[Red63440]

I am pretty sure that’s what I have, can it be used for non high temp jobs?

 

[CudaChick1968]

Just to be disagreeable, my baked-on powders look pretty amazing on cast iron parts. Check out this brake stuff ...

 

[Moparfever65]

POR15 is awesome for blocks. Paint brush. Cures rock hard and is resistant to all solvents.

 

[khryslerkid]

Is there a rattle can cast iron pant that doesn’t need to be baked?

Been using this Rattle-Can for detailing ?View attachment 1154842 View attachment 1154846
I buy it at Advance Auto, less than $10/can...

What Vandan posted.

 

[GMP440]

I quit using cast blast on exhaust manifolds. I used a spray graphite called Slip Plate. Stays on very well. I put it on my exhaust manifolds at the beginning of 2019 and still looks perfect today. I've never gotten that from any cast blast paint.

 

[GMP440]

Here is the Slip Plate graphite spray. Grainger and Napa sells it.