• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Column mount???

jim496

Well-Known Member
Local time
10:00 PM
Joined
May 10, 2011
Messages
84
Reaction score
42
Location
NORTH ROYALTON, OHIO
I need the steering column mount at the fire wall... Is this different with floor shift or column shift? I need the floor shift if it is different. Also how does the horn ring come off a Coronet 500? I swore it just twisted off, but it won't budge. Thanks, Jim
 
Last edited:
Center cap prys,
off then three screws hold ring to steering wheel.
 
I believe the plate at the bottom is the same. the cap on the horn ring twists off exposing the mounting screws.
 
Last edited:
No cap... Here is what it looks like. tmp_29911-20160104_115254_HDR-658780892.jpg
 
No screws going in from the back? Somewhere in the neighborhood of the 'C' and 'T' letters?
 
It does twist off. I did mine because it was upside down.
 
I thought it did... I'll give it hell. Thanks!! If I break it anyone know where I can get a new horn ring?
 
Last edited:
It's off and in one piece. Also found my firewall mounting plate. Thank You, for the info!!
 
Last edited:
Auto Transport Service
Back
Top