Superbeecody
Member
i have 440 stroked to a 493 in a 69 superbee I am look to put a solid roller custom grind cam in it . I guess my ? Who should I talk to about the grind an what brand of cam should I go with? Thanks
ThanksBullet always makes good cams. If you wanted to go through someone who specializes in mopars Dwayne porter is a dealer for comp cams. He's has a lot of real world numbers and experience. Plus an great guy to deal with.
Dwaynes stuff always makes good power.
Doug
Call Scott Brown @ Competition Components 1-616-499-6223 or www.buyraceingparts.com. He just did a 512 street wedge engine for me with a mild hyd roller cam, single 4 intake with the 440 source heads that made 683 hp and 688 torque pretty much across the board. Very nice pump gas street motor. When it is done it will look like a stock 426 street wedge for my 64 Plymouth Savoy. Scott has been doing cams for me for a long time and has always been spot on for my combos.i have 440 stroked to a 493 in a 69 superbee I am look to put a solid roller custom grind cam in it . I guess my ? Who should I talk to about the grind an what brand of cam should I go with? Thanks
Call Comp Cams & ask for Chris Pagent, accept no one else ( @ Comp Cams).
about how long does it take to get a cam groundCall Scott Brown @ Competition Components 1-616-499-6223 or www.buyraceingparts.com. He just did a 512 street wedge engine for me with a mild hyd roller cam, single 4 intake with the 440 source heads that made 683 hp and 688 torque pretty much across the board. Very nice pump gas street motor. When it is done it will look like a stock 426 street wedge for my 64 Plymouth Savoy. Scott has been doing cams for me for a long time and has always been spot on for my combos.
Probably would be best to call him and ask him.about how long does it take to get a cam ground
about how long does it take to get a cam ground
would you tell a little more about your combo,thanks.Call Scott Brown @ Competition Components 1-616-499-6223 or www.buyraceingparts.com. He just did a 512 street wedge engine for me with a mild hyd roller cam, single 4 intake with the 440 source heads that made 683 hp and 688 torque pretty much across the board. Very nice pump gas street motor. When it is done it will look like a stock 426 street wedge for my 64 Plymouth Savoy. Scott has been doing cams for me for a long time and has always been spot on for my combos.
about how long does it take to get a cam ground
Here are a couple of pictures of the engine. Trying to make it look "close" to a stock 426 street wedge engine. Peak HP @ 5800 rpm 683 and max torque @4600 rpm 688 ft/lbswould you tell a little more about your combo,thanks.