Dakota Digital/Aftermarket Stereo

[dodge68charger]

Hey Guys im going to be wiring up a dakota digital setup, and an aftermarket retrosound stereo in my 1970 charger. The stereo will go where the stock one went.

Where can i get ignition and constant power for these?

I dont wanna go straight to the fuse block if i dont have to. Can i use the existing radio wires?

Thinking about using a auxiliary fuse block but haven’t found something yet.

Thanks

 

[Kern Dog]

I installed an aftermarket fuse panel.

I made a bracket to mount it below the glove box, close to the RH door hinge pillar.

This panel has a constant power side and a switched power side. I have a vacuum pump for the brakes that runs to this panel along with the trunk latch, stereo, auto dimming rear view mirror and A/C clutch. The power running through it goes through a relay.

 

[dodge68charger]

I like the option for the switched and contant power. Thank You!