Difference between 1069 Cornett 440 and Super Bee?

[MikeyM]

Hello,

I have been having a hard time finding the correct or correctly bent/shaped headliner to windshield a pillar post trim. The metal piece that fits between the windshield and the headliner between the A pillars I have seen what looked to be two different trim pieces from a 69 Cornett. The curvature seems to be different and the ends where they attached to the A pillars seem to be cut at more of an angle. Also, the last 3 to 4 inches of one of the trim pieces seems to have a sharper, inward bend, if that makes any sense. Is there any difference between the coordinate 440 and the Super Bee interior trim or are they the same?

I picked up one trim piece that I thought would fit, but unfortunately it is not curved enough. And that piece was supposedly from a “69 Mopar B body“.

Thanks,
Mikey

 

[furious70]

Shouldn't be any difference there.
Make sure you don't accidentally have a 4-door piece. There doing be differences in hardtop be fixed post quarter window.

 

[PurpleBeeper]

Shouldn't be any difference there.
Make sure you don't accidentally have a 4-door piece. There doing be differences in hardtop be fixed post quarter window.

I think you nailed it

 

[YY1]

Wagon/4 door and convertible parts are different than 23/21 body 2 doors.

However, a 66/67 part might be the same provided it is from a 23 body, as those years the 21 body used the 4 door/wagon part.

 

[MikeyM]

Oh man… Thanks all. I bet that’s it.