FOR SALE Dodge Aspen project w/Magnum Force Suspension

[Migsbig]

For sale 1978 Dodge Aspen Coupe project that was being built for Performance driving. Car started out as a clean original CA car that was stored away in the 1990's when the original owner died. Very straight and nearly rust free car (a little rust started in the lower rear quarter panel) and looks like it was never in an accident. Burgundy bench seat interior looks nice and could still be used. Car was taken tot Magnum Force Racing for suspension upgrading. Recently had a full "Transformer" CUDA/Charger style front performance package done on the frontend which is a heavy duty custom crossmember, fabricated chrome-moly tubular upper control arms, powder coated blue k-member, heavy duty lower control arms, Swaybar package, 15:1 ratio power steering, double adjustable coil over shocks, 2in forged dropped Mopar spindles (1973+ large bearing type) small motor mounts (big block motor mounts & later style hemi mounts cane be used on this suspension ) and Wilwood hubs are installed so it could be rolled around easily.If someone wanted to this suspension, it would fit bolt onto1966-74 B/E-body models and would just need the upper control arms changed and they could sell off the body to re-coupe some cost. Have not tried to start the 318 engine as I was going to install a 550hp engine, but its all there. Steers fine, rear brakes still hooked up so it can still use emergency brakes and transmission can still be shifted from the column to help stabilize it for transport and storage. I have a friend who does transport and can do west coast/Cali quotes for those that can not pickup in San Jose, CA. If a foreign buyer is interested, I can also get quotes for shipping to ports in San Francisco, Oakland and Los Angeles which is usually in $250-$500 range. Have clean pink slip. Rally wheels are not included and a set of ugly, mis-matched junky rollers will be on the car. Located in San Jose, CA. came out to $6,000 in parts alone. Since Magnum Force installed the front end, that was another $2000 in installation costs. The Value of the car since it's soo clean and complete was another $2,000 making this a $10k project car. Sadly, got to move on decided to let this one go. Price is 1/2 at will sell for $4995 That pretty cheap for most of the hard work done. I am not looking to trade it at this time.

 

[Migsbig]

dropped price down to $4500 and that's as cheap as it gets.

 

[Migsbig]

down to $4k and would like it gone. This suspension will work on 1966-74 B/E-body also.

 

[Migsbig]

decided to post on ebay one more time, then going to scrap body.

 

[Basket case]

screw e bay...I tried to sell a truck for two months, got tons of questions, lots of I want it....even sold it, but never got paid. Put it on Craigslist and sold it in two days. Hate to see you scrap that clean body.

 

[Migsbig]

been on craig's 2 months, nobody wants it in California due to bi-annual smog laws. Can't store it forever when storage is $100 per month, so its either sold or scrapped in 6 weeks. If you know someone, let them know because I can't justify spending anymore on it.

 

[Richard Cranium]

With a good vacuuming, gunking the engine compartment and spit shine, you could probably get a little more than scrap pricing.

 

[Migsbig]

does not matter here in California. Everyone hears it need bi-annual smog and they loose interest.

 

[Migsbig]

Sale pending

 

[Kern Dog]

does not matter here in California. Everyone hears it need bi-annual smog and they loose interest.

You mean that instead of tight interest, it is loose?