don`t bump my bumperetts

[fastfarmer]

I will be installing front bumperetts on my 70 charger. Is there a support that holds the lower end of the front guards. Maybe positioned inside the lower front valance? If so what is it commonly called and how hard is to find this support? It is hard to find something when I don`t know what I am looking for. Pics would help.

 

[BeeKool]

Welcome nice ride

 

[4mayhemi]

The bottom of the guards go thru the shield (valance) and bolt to the panel reinforcement

 

[fastfarmer]

The bottom of the guards go thru the shield (valance) and bolt to the panel reinforcement

View attachment 497209

The bottom of the guards go thru the shield (valance) and bolt to the panel reinforcement

View attachment 497209

Thanks, So is what you call the "panel reinforcement" a separate piece that would not be used if there were no bumper guards?

 

[4mayhemi]

Sorry its officially called the bumper brace which bolts to the inner/outer supports. My Coronet bolts the same way but the supports are shaped different, so maybe someone with a Charger can give you a pic down inside their bumper. The FSM and Parts Book is the only pic I can find.
http://www.autometaldirect.com/amd-front-bumper-center-bar-bracket-68-70-charger-p-133.html.

Also here's a good 70 Charger build website with full resto pics:
http://www.1970dodgecharger500.com/restoration/

 

[4mayhemi]

Here's a pic of a 70 Coronet. Same deal though. Upper/Lower reinforcement, bumper brace connecting the two inner/outer supports.

 

[fastfarmer]

Here's a pic of a 70 Coronet. Same deal though. Upper/Lower reinforcement, bumper brace connecting the two inner/outer supports.

View attachment 497905

Thanks a bunch! Your information and Pic has helped.