- Local time
- 12:41 AM
- Joined
- Mar 28, 2014
- Messages
- 35,809
- Reaction score
- 59,398
- Location
- South Louisiana
DreRacing -68 charger build (need advice)
- Thread starter DreRacing
- Start date
DreRacing
Active Member
I finally got to drive the car to my first show.
I had only time to install the one piece window on one side as this was a pain in the *** to get to work. I really do not recommend them.
The car was crashed, hit by a trailer the day after I come home. The insurance will fix this. hopefulle it will be OK
![IMG_4729[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_4729-1-jpg.1913573/ "IMG_4729[1].JPG")
I like the doorpanels from Fesler. I could not have done it better myself. This is professional. They fit great with the onepiece window
![PLSO6736[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/plso6736-1-jpg.1913574/ "PLSO6736[1].JPG")
After test ride I found out that the rear springs from RMS are way too soft. They are 200lbs. I think this must be wrong. I need at least 300lbs. I think also in the front I need stiffer, I have 450lbs right now, but will measure more on them (compression height)
I had only time to install the one piece window on one side as this was a pain in the *** to get to work. I really do not recommend them.
The car was crashed, hit by a trailer the day after I come home. The insurance will fix this. hopefulle it will be OK
I like the doorpanels from Fesler. I could not have done it better myself. This is professional. They fit great with the onepiece window
After test ride I found out that the rear springs from RMS are way too soft. They are 200lbs. I think this must be wrong. I need at least 300lbs. I think also in the front I need stiffer, I have 450lbs right now, but will measure more on them (compression height)
Similar threads
