Just Send It
Well-Known Member
Edelbrock STR-14-6 with 2 STR-14-45 tops.
To my knowledge, this intake has never been bolted down. No modifications or grinding has been done to the base. One of the 4500 tops was 'ported' and polished by someone before I acquired it.
Overall it needs to be cleaned, but it is in excellent shape considering it's age. The only blemish is a small 5/16" chip on the 6-pack top that happened during one of our moves.
$1,250 shipped to the lower 48 States
It's located in Central Oregon (97702) if you'd like to come look at it.
Trades: The only trade I'm looking for at this time is a high-end set of Small Block solid roller lifters with an 0.800+ wheel. No pushrod oiling.
BAM, Morel, or Crowers would be ideal.
Here's a picture of the small chip on the 6-Pack top.
Thanks,
Jim
To my knowledge, this intake has never been bolted down. No modifications or grinding has been done to the base. One of the 4500 tops was 'ported' and polished by someone before I acquired it.
Overall it needs to be cleaned, but it is in excellent shape considering it's age. The only blemish is a small 5/16" chip on the 6-pack top that happened during one of our moves.
$1,250 shipped to the lower 48 States
It's located in Central Oregon (97702) if you'd like to come look at it.
Trades: The only trade I'm looking for at this time is a high-end set of Small Block solid roller lifters with an 0.800+ wheel. No pushrod oiling.
BAM, Morel, or Crowers would be ideal.
Here's a picture of the small chip on the 6-Pack top.
Thanks,
Jim
Last edited:
