mopar67440
Active Member
Quick question on this end link upgrade. Current using stock setup with urethane bushing on the factory 1-1/8 sway bar.
I'm seriously contemplating this Moog upgrade to a solid link.
Looks like part number Moog K750074 would be the correct part that may not require cutting and welding while keeping sway bar close to parallel to the ground. Looks like the Moog K8266 was the cut and weld pc.
Anyone perform this upgrade on a 67 b-body?
Thanks!
I'm seriously contemplating this Moog upgrade to a solid link.
Looks like part number Moog K750074 would be the correct part that may not require cutting and welding while keeping sway bar close to parallel to the ground. Looks like the Moog K8266 was the cut and weld pc.
Anyone perform this upgrade on a 67 b-body?
Thanks!
