• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Factory Front to Rear Ride Height Difference - 1964 Polara

Charlie Brown

Well-Known Member
Local time
2:05 AM
Joined
May 23, 2021
Messages
189
Reaction score
215
Location
Vars, Ontario, Canada
If I measure the ride ht. at the rockers behind the front wheels and in front of the rear axle, what should the difference be, if any. I'm trying to determine how much higher than stock the rear of my car is - i.e. - I need a starting point.
 
Actual ride height, I don't know, but most sat basically level front to rear from the factory. The rake was a hot rodding thing to which most of us subscribed, if only a bigger tire on the back.
 
Level to low in the rear. Ride height measured from under cars suspension.
 

Attachments

  • PRE ALIGNMENT RIDE HEIGHT PROCEDURE (1).pdf
    639.4 KB · Views: 108
Auto Transport Service
Back
Top