Big Bad Dad
Well-Known Member
Ok, I assumed you were working with an old original unit.It's brand new, and it works, just way off but it wouldn't hurt to check. Thanks.
Ok, I assumed you were working with an old original unit.It's brand new, and it works, just way off but it wouldn't hurt to check. Thanks.
I am having this issue as well. I am losing 10+ohms resistance at the tank sending unit connector. I cleaned sending unit threaded stud and inside connector and gained a couple ohms resistance reading, but still reading less on the other side of the actual tank connector. I too am looking for the tank connector pigtail.Thanks. What is RA?
Guys, I've already diagnosed it, just need a new connector as the one on the car is hard as a rock. Temp gauge reads, barely but it reads. Fuel sending unit wire has strong pulsed power. Ground strap is in place and has solid ground connection.
I started this thread to find a pig tail that I could use to repair my harness. Don't really want to replace the entire harness for on pigtail connector.