And the reason you are still using a crush sleeve is?I also have nothing to measure the depth. It’s basically a seek and destroy mission. I’m going on my third crush sleeve
Subtract.... like I said earlier I would start by removing .020" and see where that puts the pattern. Pinion depth tool is cool but not necessary.I used the stock pinion shim. I thought that was supposed to be the one used. So I need to add to it correct? I would also need to change the carrier shims too. Does that sound right? Sorry for the dumb questions. Mike
That's a mess ! Are you putting a "load" on the ring gear while turning to take a pattern?