Has anyone built a dashboard assembly stand?

[Richard Cranium]

If so, please post some pictures.

 

[T2R9]

Just 2x4's

 

[T2R9]

Couple more.

 

[themechanic]

I just laid the 70 Cuda dash on a blanket on the car's hood for disassembly. I used a blanket on a folding table for reassembly.

No need to get fancy.

 

[moparmarks]

I have an E body one.

 

[Charger72]

I copied Dodge Don's design for the taller one I had, then I built this shorter one for helping with wiring up he dash, installing the radio, etc.

 

[dadsbee]

 

[whyjay]

Similar to what others have posted. Just used what I had laying around.

 

[zyzzyx]

 

[Islandkent]

Nice and simple. Looks great! Swivel castors with locks would be a must have.

 

[493 Mike]

I used one of the 3 fender stands I built. My hood is on another one.
Mike

 

[69B7RR]

Nothing special, but allowed easy access to all sides for prep & primer………

 

[torredcuda]

Just did this a couple weeks ago, I went looking for ideas and found one made to mount to an engine stand. I happen to have an extra one kicking around so whipped up a quick mount out of steel tubing, bolts where dash attaches to cowl sides and I made a support for the back for added security.

 

[Richard Cranium]

Thanks everyone.

 

[Richard Cranium]

Built one this afternoon out of three 2X4’s ….

 

[dadsbee]

Well look at you ! LOL HEY... is that casing trim to the right, I could use that!

 

[Richard Cranium]

Well look at you ! LOL HEY... is that casing trim to the right, I could use that!

Sure, come and get it.

 

[gtx6970]

Couple more.

View attachment 1555101View attachment 1555102

I built one exactly like that . Worked perfect on multiple cars

 

[5wndwcpe]

I built mine to be a rotisserie. Made life much simpler.