Haydon 2765

[al383]

Purchased a fan clutch from my local auto store. They crossed the numbers to a haydon 2765. The hole where the water pump shaft goes was about 3/4 of an inch. My input shaft is 1/2 inch possibly 9/16ths. There was no bushing sent with that so I returned that bc I could not center the fan clutch. Does anyone know where I can get this fan clutch with the proper fitting bushing?

 

[dieseldazzle]

https://m.summitracing.com/parts/prm-21100

 

[aldal]

https://www.summitracing.com/parts/hda-2765

 

[al383]

https://m.summitracing.com/parts/prm-21100

thanks

 

[al383]

https://www.summitracing.com/parts/hda-2765

thanks

 

[Rick62]

Purchased a fan clutch from my local auto store. They crossed the numbers to a haydon 2765. The hole where the water pump shaft goes was about 3/4 of an inch. My input shaft is 1/2 inch possibly 9/16ths. There was no bushing sent with that so I returned that bc I could not center the fan clutch. Does anyone know where I can get this fan clutch with the proper fitting bushing?

I have one advertised in the parts forum. Very slightly used. $20 shipped. Includes the bushing. PM me if interested.