Headliner

[Smithboys69]

Hello. I would like to ask if anyone has pictures of the correct installation of the rear window steel tack strips and angled bracket that goes to the headliner of a 69 charger. I am getting that there are X clips that hold this. The body shop took these out of the car and I have no reference to re-install them. How many are needed? I am getting things rounded up to install. I would like to also see what fasteners are used on the angled bracket to install this if at possible. Tom at RT specialties probably has some but needs to see what they are. Also can the clips be pictured at installation in the windshield area to hold the steel trim? Thanks in advance for any assistance provided.

 

[Danno44]

 

[Danno44]

2 on sides, 6 along the top on mine.

 

[Smithboys69]

View attachment 1854424View attachment 1854425View attachment 1854440

This is a good reference so far. I am looking at that angled bracket and it looks like it goes to the roof and acts like a bump stop for the first headliner bow for the tensioner springs to pull against. The rest can be put to the sides and stretched forward toward the front of the car if I am looking at this correctly. Yes?

 

[Danno44]

The angle piece is down by the package tray, underneath the bottom of rear window.

 

[Smithboys69]

The angle piece is down by the package tray, underneath the bottom of rear window.

OK I see it now. I was looking at the wrong thing. Thank you!