Heater Box - 70 Charger

[DeltaV]

Heater core

View attachment 1940464View attachment 1940465View attachment 1940466View attachment 1940467View attachment 1940468View attachment 1940469View attachment 1940470View attachment 1940471View attachment 1940472View attachment 1940473

A few more

 

[rklewis1005]

Very nice, I'll have a good reference to look at.

 

[jimbosride]

Make sure you bench check the completed unit before install. Nothing more annoying than a noisy squirrel cage.

 

[Coelacanth]

Make sure you bench check the completed unit before install. Nothing more annoying than a noisy squirrel cage.

Seconded. I restored my non-AC heater box and reinstalled it many years ago. This summer, I removed and restored the instrument panel, installed LEDs, sorted out some wiring issues...and the heater fan control doesn't seem to be spinning up the blower motor. Low and Medium fan speed test OK with a test light at the dark green & brown wires, but the light green High speed doesn't light up. The motor does make a bit of sound on Medium, but only that. Not sure if it's the motor or not but I am not looking forward to pulling out the heater box again...

At least I think you can remove just the front plate to fix the squirrel cage, but the motor's on the firewall side...