• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hello from NC

HemiCap

New Member
Local time
4:06 PM
Joined
Dec 23, 2020
Messages
4
Reaction score
7
Location
NC
New to the forum, I have a 74 Charger I plan on doing a 6.4 Hemi 6 speed in. I will have questions I'm sure.
 
welcome to FBBO

good luck with the gen 3 Charger & modern Hemi/6 speed swap
 
0635E1A1-ED8A-4BE2-8791-FBE8941359A3.png
FF374B69-2EA0-4E45-AE1D-7A240DCE3F6D.gif

@HemiCap Welcome from NJ!
 
You wanted pictures you got them, the car is painted gray and they did wet sand it all but they never finished cut & buff. The last picture is my 74 from back in 74 and I'm planning to duplicate it except the power train.
IMG_2415.jpeg
IMG_2417.jpeg
74Charger-11.jpg
 
Hi, Nice looking car. I am planning a Gen 3 conversion on my 71 Satellite. My car has a very solid body. The car has been stored in pieces for the last 20 years, so I have a pretty clean slate to work with. How much of the Gen 3 conversion work are you doing on your own, and how much, if any, are you getting done by someone else? I need help and would be interested in your experience. I am in the Charlotte area, but have looked at shops up to 3 hours away, currently getting pricing and timing to start and finish the job. I want someone to do the engine, transmission, power steering and air conditioning in particular, and especially installing the computer system, so it is compatible and runs the car. I can do the suspension. Let me know how you're doing and I would appreciate any advice.
Thanks, Paul
 
Back
Top