Mad_Scientist
Member
Sorry for the long post....
I have a 572 Hemi in a 69 Bee that im putting together. Car will have AC and P/S. I originally ordered a Cold Case radiator with dual puller fans. I also ordered a set of CVF Racing serpentine pulleys. The pulleys ran into the fans and there was no way it would fit. In addition, the lower crank pulley was WAY out of alignment because of the thicker ATI pulley.
I live in Texas and the car will see lots of street miles. I'm taking it on the Power Tour, so it has to stay cool. The bigger radiator is a MUST, but I'll go either way on electric vs mechanical fan. Also, the engine builder recommended that I stick with the bigger ATI balancer.
What is everyone else running on their modified Hemis? Is there a place that can make me a custom crank pulley that will work on the ATI balancer and have enough grooves for AC and PS? If so, then I can run 440 pulleys. Any advice would be greatly appreciated!
Thanks,
Tim
I have a 572 Hemi in a 69 Bee that im putting together. Car will have AC and P/S. I originally ordered a Cold Case radiator with dual puller fans. I also ordered a set of CVF Racing serpentine pulleys. The pulleys ran into the fans and there was no way it would fit. In addition, the lower crank pulley was WAY out of alignment because of the thicker ATI pulley.
I live in Texas and the car will see lots of street miles. I'm taking it on the Power Tour, so it has to stay cool. The bigger radiator is a MUST, but I'll go either way on electric vs mechanical fan. Also, the engine builder recommended that I stick with the bigger ATI balancer.
What is everyone else running on their modified Hemis? Is there a place that can make me a custom crank pulley that will work on the ATI balancer and have enough grooves for AC and PS? If so, then I can run 440 pulleys. Any advice would be greatly appreciated!
Thanks,
Tim