• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB I am in the beginning stage of looking for a 1968 Superbee to purchase.

nitro_rat said:
View attachment 1966375
Someone replaced the lower radiator hose and thoughtfully slid the original clamp up onto the radiator neck and left it there. They replaced it with an incorrect albeit more functional worm clamp. Corrosion likely residue from original hose leaking. I don't see a problem here...

View attachment 1966376
This is an original paint, 56 year old Mopar. It's not going to be 100% rust free!


View attachment 1966378

It's a rare factory "stripe delete" bee. I would argue that it adds to the value. "88" on the fender tag signifies the stripe delete...

View attachment 1966377



View attachment 1966379
On this we agree.


Why not? Gateway is a classic car dealership. Many or all of the vehicles they sell are on consignment. They're not in the business of making every car they sell perfect. This car looks like a very solid original that could use a little work to bring it up to snuff.


Any time you purchase any old car you're rolling the dice.


Again, I agree with you on this. BUT, Keystone Klassic wheels are a period correct "day two" modification and they closely resemble Magnum 500's. They get a pass in my book for anything that's not a "points correct" restoration. I prefer Cragars or 5-slots but Keystones are definitely appropriate.


I have no idea what "Bart" (guessing this is the OP) paid for his '68. It's a nice car. Not perfect, but nice. I was responding to @Billccm when I posted the link to this car:


I feel like this car is similar spec to Bart's '68. Green on green, no vinyl top, and a '69. I have no association with Gateway Classic Cars, the consignor of this particular car (if there is one) or "Bill." I just remembered seeing it recently and based on what he said, thought Bill might like to have a look at it.
Click to expand...
In the interest of transparency, I will tell you all that I paid $42.5k for my '68 Bee. I think I did mention it in one of the videos.
 
Latest update:

My '68 Super Bee does NOT pass the safety inspection 12232025​


Sorry, I know this video it a little bit on the long side, but I wanted to get you the whole story. Plus most of you have some time off over the Christmas and New Year break, so you have a little extra time to check it out! Merry Christmas to you all, and I wish you all a very happy and prosperous New Year!

 
Rust on back side of the pistons on the wheel cylinders. Car that wasn’t driven much and stored back east where there’s moisture and frost cycles.

If you were doing it yourself you could just change all 4 wheel cylinders. But a pro shop can’t cut corners like that.

It would be a time to upgrade to front disk brakes.
 
Bart, great video. A good lesson for all of us car guys to keep watch on those wheel cylinders. I am always looking for fluid leaks under the car especially when you see the tire getting wet. You are fortunate to have these guys where you have a high level of trust.
 
Anything that can be fixed with a wrench and a trip to O'Reilly's is par for the course. Well bought and I'm happy for you. Merry Christmas.
 
autoxcuda said:
Rust on back side of the pistons on the wheel cylinders. Car that wasn’t driven much and stored back east where there’s moisture and frost cycles.

If you were doing it yourself you could just change all 4 wheel cylinders. But a pro shop can’t cut corners like that.

It would be a time to upgrade to front disk brakes.
Click to expand...
Even if I was doing it myself, I would do the full meal deal. They told me that the rear brake line that splits and goes to the two wheels is completely blocked with hard stuff in it, so they plan to replace that among other things. As for front disc, I am going to hold off on that for now. I just want to get the car functional and drive it for a while. I have been driving my 4 door Coronet 440 with 4 wheel drum brakes for years so I am current on the feel and operation of 4 wheel drums! Merry Christmas and Happy New Year!
 
Bart K said:
Even if I was doing it myself, I would do the full meal deal. They told me that the rear brake line that splits and goes to the two wheels is completely blocked with hard stuff in it, so they plan to replace that among other things. As for front disc, I am going to hold off on that for now. I just want to get the car functional and drive it for a while. I have been driving my 4 door Coronet 440 with 4 wheel drum brakes for years so I am current on the feel and operation of 4 wheel drums! Merry Christmas and Happy New Year!
Click to expand...

Oh wow it’s bad inside the system. Hopefully the brake lines can be flushed out and saved.
 

I pick up the Super Bee from the shop and go on a short cruise with my friends Cobra 12302025​


As the title says, My neighbor, Glen took me to Mr. Automotive's Classic Car Garage to pick up the '68 Super Bee after the brake work and fluid changes were complete. We decided on about an 8 mile route to give the Bee a little shakedown cruise. There is more that needs to be done, but at least it is safe for the road now.The remaining things to address are:-Replace carb or wire up an electric choke-Fix dash lights-Replace pinion seal and u-joints-Replace shift shaft seal -Check tune up components and replace and tune as required-Upper and lower control arm bushingsWhen these things are addressed, I will feel confident that the Super Bee will be ready to drive and enjoy! At some point later, I will consider dealing with the rust and scratch on the body. We took it easy on this cruise because as you all know, this car is new to me, so I want to be careful until I get to know it better. It had also been sitting for most of the last 21 years. The guy I bought it from told me that it had 1300 miles on it since 2004. This video is at normal speed. I know it is on the long side, please listen to and watch as much as you like. I know some of you will watch it all! I hope you enjoyed listening to the music of Glen's Cobras side exhaust while watching the Bee on her maiden voyage!!!To learn more about Mr. Automotives Classic Car Garage, please see
instagram_1x.png
/ mrautomotiveaz

 
Nothing like a romp on a beautiful southern Arizona winter afternoon in a triple pickle B Body Mopar. You are living the dream.

Your 69 Coronet does indeed drive like a brand new car!

Thanks for the video and updates.

Happy New Year!
 
Billccm said:
Nothing like a romp on a beautiful southern Arizona winter afternoon in a triple pickle B Body Mopar. You are living the dream.

Your 69 Coronet does indeed drive like a brand new car!

Thanks for the video and updates.

Happy New Year!
Click to expand...
This is one of the things I love about living in SE Arizona, a 365 day driving season! I heard from one of the other forum members up north that they have parked their car until April or May, and I feel so badly for them! Happy New Year back to you!!!
 
Nice and warm in the cab! -30C tonight, with the windchill, and 100CM (40") of snow in the forecast. I blew the first foot already so the Granddaughters could be dropped off.

Love the '68!!! ENJOY it...
 
You must log in or register to reply here.

Similar threads

1968_Satellite
WTB WTB 1968 1969 Plymouth Satellite 4dr for daily driver
Replies
3
Views
165
Rug_Trucker
R
M
  • Locked
WTB WTB 1968 Dodge Charger restored period correct turn Key driver. Preferably Western/Northwest US. PRICE RANGE UP TO 75K I AM SERIOUS
Replies
10
Views
1K
Mikes68Charger
M
Blackheart
  • Locked
WTB Looking for '68 Body Small Block Headers
Replies
1
Views
232
sleepr64
sleepr64
J
  • Locked
WTB Mopar Project Car-Oregon
Replies
5
Views
372
jeeper
J
bob32268
  • Locked
WTB WTB AM Thumbwheel radio for 69 Charger
Replies
2
Views
599
bob32268
bob32268
Back
Top