Bigal75
Well-Known Member
- Local time
- 7:47 AM
- Joined
- Aug 18, 2011
- Messages
- 934
- Reaction score
- 230
- Location
- Ottawa Ontario Canada
I'l put the puller on and hit the sides and see how that works.
Big Al, just went thru this three days ago, was installing a super stock oil pan with the hole in the middle. the whole thing had to come off anyway so I took it loose at the k-member, my tie rods came off with out any trauma, then took it over to the vice and chucked it up, it took about 20 seconds of hammering with the air hammer to get it off. it may be or not be an option, I had to take my drag link off anyway so it wasn't an issue. greased the **** out of it before I put it back though. Dave.67 b body. Tried a pickle fork and zip gun and it still won't seperate from the drag link. I've got limited space as in I don' have access to a lift. Any tricks to get this off?