mopar951
Well-Known Member
Hi everyone is this the ignition light? It’s on my 1969 dodge coronet?
Thanks how does it go back in th opening??Yes.
Oh ok thanksIt doesn't, the light just shines thru the hole.
Without the A01 light package I assume?I have an old race car, replaced all of the wiring with M&H. That ignition, map light and glovebox harness was just taped to the old hacked dash harness. It took a little bit of laying under the dash to figure out how it all fits together, it's all plug and play. The delay for the ign is still available. The picture in #5 is pretty much all of it, except for a missing wire ends or two. My '69 Road Runner did not have a light for the ash tray or heater control, non A/C.
Yea thanks I will look into it moreI have an old race car, replaced all of the wiring with M&H. That ignition, map light and glovebox harness was just taped to the old hacked dash harness. It took a little bit of laying under the dash to figure out how it all fits together, it's all plug and play. The delay for the ign is still available. The picture in #5 is pretty much all of it, except for a missing wire ends or two. My '69 Road Runner did not have a light for the ash tray or heater control, non A/C.
Yea has the light packageWithout the A01 light package I assume?
Light package included the following to my knowledge for a 69 coronet.
1. Map light
2. Ignition switch light with time delay off.
3. Ash tray light
4. Glove box light
5. Trunk compartment light
6. Fender mounted turn signals