ignition switch

[honcho]

Gotta replace ignition switch. Ordered US50 switch,never replaced one but it came with no key cylinder. Do I just unscrew old cylinder and screw in the new one? Thanks never replaced one before :VB toast:

 

[69Runner]

Yes, the old cylinder should go into the new switch for the old key to work.

 

[Pistol Pete]

The lock cylinder doesn't unscrew. You'll need the key to turn it either on or start (don't remember which) and on the side of the switch there is a small slot you'll need to insert a flat blade screwdriver into to depress the locking pin and release the cylinder.

 

[honcho]

So when you install cylinder just reverse process? Ok will try both ways to get cylinder out, I just f'ing hate electrical issues,I suck at it:VB toast: