Info needed on this set of cast iron indy heads.

[1967coronet]

A friend of mine stopped by the shop today he had this set of what I think are indy brand cast iron heads, large valves as you can see, rockers are unknown to me. External oil line to each head.
No number on rockers top side.
Heavy springs with damper inner.
No casting numbers except the ( ICH ) & the ( 440C )
He also has the finned valley cover , indy intake,
He got these in a car / parts deal along with a couple 440 blocks ect.
What are these worth used ? He wants me to shoot him a offer.
These are unchecked as is. Also there is no indy monogram cast into the head.
I googled around and seen one milled ready to go set for $2,000.00
I am not paying that much lol.

 

[pnora]

I would not pay to much for them unless they were checked over and freshened up. http://www.indyheads.com/images/t_pge/440_1_ctech.pdf

 

[RemCharger]

looks like the indy 1.5's. 1000? 1500? does it matter when you bolt on 100hp over stock?
They're just heavy so under rated

 

[PRHeads]

Pretty popular with the iron head rule tractor pull crowd.
There is nothing else as good as those for that class, and they don’t make them anymore.

 

[pnora]

Pretty popular with the iron head rule tractor pull crowd.
There is nothing else as good as those for that class, and they don’t make them anymore.

And that is why I would be careful on what you spend. If by some chance you need another casting.

 

[1967coronet]

Pretty popular with the iron head rule tractor pull crowd.
There is nothing else as good as those for that class, and they don’t make them anymore.

Thank you for that info.