1970 charger sail panel board have clips to hold it up? I googled and dont see any. I did see some for 70-74 challenger.
interior sail panel board does it have clips?
- Thread starter davek
- Start date
BLK 68 R/T
Well-Known Member
If it’s the same as a 68, I recall small metal push through pins that held them on. Just one per side if I remember correctly.
LowlySatellite
Active Member
I just removed them on my ‘70 Satellite and they had these super king fu clips. I hope this helps.
BLK 68 R/T
Well-Known Member
Google search turned up this picture.
- Local time
- 10:07 AM
- Joined
- Feb 20, 2012
- Messages
- 74,400
- Reaction score
- 285,254
- Location
- New Hampster
That picture is correct.
Are these panels also on the 68 Chargers?
BLK 68 R/T
Well-Known Member
Yes.
Now I have to find some,thanks for the pic.
Never got the alert that someone replied to my thread AGAIN
I see these for challenger but nothing for charger. EMailed James at DMT since he sold me the sailpanels with no clips. Stay tuned.
BLK 68 R/T
Well-Known Member
Not correct for charger. 68-70 chargers use a pin of sorts. Like a short nail with screw threads on it. Think of an emblem stud with the spiral threads cut onto it. That’s what the pin looks like for the sail boards on a charger.
BLK 68 R/T
Well-Known Member
RT68440
Well-Known Member
My '68 had what looks like a nail with twisted ribs on it to grab the metal as it goes in. I believe these to be original as the headliner was original.
Similar to this:
Similar to this:
BDnFL
Well-Known Member
My 68 Charger had one of the above nail looking fastener left in the roof that RT68 posted.
I couldn’t find any replacement.
I used a self tapping screw with rounded head and small washer.
Screwed through the cardboard sail right next to the original holes.
I couldn’t find any replacement.
I used a self tapping screw with rounded head and small washer.
Screwed through the cardboard sail right next to the original holes.
Last edited:
Similar threads
